|
 We
believe that the new STI press will become the
standard of the industry. Here's why:
The mechanical action incorporates a pair of
rolling ball die-set bushes to ensure long,
trouble free life and accurate alignment. The
frame is strong but simple with a hydraulic
height adjustment and a micro stroke adjustment
for fine setting. The unique method of heat
insulation confines the heat to the platen where
it properly belongs.
The timer is a solid-state, pure-dwell, plug-in
module and the heat controller uses a platinum
heat sensor to ensure excellent heat control.
These features add up to a machine that makes
a good impression wherever it is used.
|
Features of a an STI Hot Stamp Press
-
Heavy construction of frame
-
Hydraulic lift for head assembly
allows one operator to raise and lower
head
-
Micro height adjustment speeds final
set up
-
Optional stroke limiter saves 60%
of air
-
Solid State heat control, accurate
to +/- 1 F
-
Platinum heat sensor eliminates 1%
drift found in regular thermocouples
-
Solid state pure dwell timer
Add Features with PLC Controller
-
Digital readout of all controls
-
Solid state foil delay timer
-
Automatic batch counter with shut
off features
-
Warning lamps pinpoint problems immediately
-
Removable key supervisory control
of all settings
-
Maximum temperature preprogrammed.
Will read actual head temperature
-
Fail-safe circuits stop machine if
component failure negates hand switch
safety circuit
Accessories and Other Equipment
-
Four Wall Chase
-
Additional Head Slide
-
Electric Foil Feed
-
Front to Back Foil Feed
-
Air Cylinder Turntable with 12"
Diameter Stop Plate 6 Stations Standard
- Others on Request REQUIRES SAFETY
GATE
-
Extra 12" Diameter x 1/2"
Aluminum Dial Plate
-
Air Slide Table - 6" x 8"
- 6" Stroke
-
Hand Slide Table - 6" x 8"
- 6" Stroke
-
Safety Gate - Wraparound Lexan with
interlock and reset
-
Vacuum Takeoff
-
Machine Stand
|
|
|
Model No.
|
HS
100
|
HS
150
|
|
Pressure
|
1 Ton, 890 kg
|
1.5 Ton, 1285 kg
|
|
Impression Area
|
6" x 6" (127
mm x 152 mm)
|
6" x 6" (127
mm x 152 mm)
|
|
|
6" x 8" (152
mm x 203 mm)
|
6" x 8" (152
mm x 203 mm)
|
|
|
|
6" x 12" (152
mm x 305 mm)
|
|
Roll Leaf Feed
|
2" x 5" (50
mm x 127 mm) Back front mechanical. All
others right to left air pull.
|
-
|
|
Distance from Center of Head to Frame
|
8" (203 mm)
|
9" (228 mm)
|
|
Maximum Part Height
|
8" (203 mm)
|
12" (305 mm)
|
|
Electrical Requirements:
115 volts A.C. or 220 volts A.C. available
on all models
|
5" x 6" (127
mm x 152 mm) 850 Watts
6" x 8" (152
mm x 203 mm) 1050 Watts
6" x 12" (152
mm x 305 mm) 1400 Watts
|
|
Dimensions
|
40" Height
24" Width
24" Depth
|
40" Height
26" Width
26" Depth
|
|
Shipping Weight
|
300 lbs.
|
350 lbs.
|
|
Air Consumption
At 30 cycles per minute:
|
15.21 cubic feet
.425 cubic meters
|
24.6 cubic feet
..688 cubic meters
|
|
Maximum Air Line Pressure
|
120 PSI
|
|
**Optional stroke limiter will reduce
air consumption by 60% when the machine
runs with automatic feed unit.
|
|
 |
 |
|
|
For
More Information on
contracting a Pad Printer
CLICK
HERE or
Call
(517) 265-4087
|
|
|
|
|
|
|
|
Phone: 517-263-0758
