|
 We believe that the new STI press will become the standard of the industry. Here's why:
The mechanical action incorporates a pair of rolling ball die-set bushes to ensure long, trouble free life and accurate alignment. The frame is strong but simple with a hydraulic height adjustment and a micro stroke adjustment for fine setting. The unique method of heat insulation confines the heat to the platen where it properly belongs.
The timer is a solid-state, pure-dwell, plug-in module and the heat controller uses a platinum heat sensor to ensure excellent heat control. These features add up to a machine that makes a good impression wherever it is used.
|
Features of a an STI Hot Stamp Press
-
Heavy construction of frame
-
Hydraulic lift for head assembly allows one operator to raise and lower head
-
Micro height adjustment speeds final set up
-
Optional stroke limiter saves 60% of air
-
Solid State heat control, accurate to +/- 1 F
-
Platinum heat sensor eliminates 1% drift found in regular thermocouples
-
Solid state pure dwell timer
Add Features with PLC Controller
-
Digital readout of all controls
-
Solid state foil delay timer
-
Automatic batch counter with shut off features
-
Warning lamps pinpoint problems immediately
-
Removable key supervisory control of all settings
-
Maximum temperature preprogrammed. Will read actual head temperature
-
Fail-safe circuits stop machine if component failure negates hand switch safety circuit
Accessories and Other Equipment
-
Four Wall Chase
-
Additional Head Slide
-
Electric Foil Feed
-
Front to Back Foil Feed
-
Air Cylinder Turntable with 12" Diameter Stop Plate 6 Stations Standard - Others on Request REQUIRES SAFETY GATE
-
Extra 12" Diameter x 1/2" Aluminum Dial Plate
-
Air Slide Table - 6" x 8" - 6" Stroke
-
Hand Slide Table - 6" x 8" - 6" Stroke
-
Safety Gate - Wraparound Lexan with interlock and reset
-
Vacuum Takeoff
-
Machine Stand |
|
|
Model No. |
HS 100 |
HS 150 |
|
Pressure |
1 Ton, 890 kg |
1.5 Ton, 1285 kg |
|
Impression Area |
6" x 6" (127 mm x 152 mm) |
6" x 6" (127 mm x 152 mm) |
|
|
6" x 8" (152 mm x 203 mm) |
6" x 8" (152 mm x 203 mm) |
|
|
|
6" x 12" (152 mm x 305 mm) |
|
Roll Leaf Feed |
2" x 5" (50 mm x 127 mm) Back front mechanical. All others right to left air pull. |
- |
|
Distance from Center of Head to Frame |
8" (203 mm) |
9" (228 mm) |
|
Maximum Part Height |
8" (203 mm) |
12" (305 mm) |
|
Electrical Requirements:
115 volts A.C. or 220 volts A.C. available on all models |
5" x 6" (127 mm x 152 mm) 850 Watts
6" x 8" (152 mm x 203 mm) 1050 Watts
6" x 12" (152 mm x 305 mm) 1400 Watts |
|
Dimensions
|
40" Height
24" Width
24" Depth |
40" Height
26" Width
26" Depth |
|
Shipping Weight |
300 lbs. |
350 lbs. |
|
Air Consumption
At 30 cycles per minute:
|
15.21 cubic feet
.425 cubic meters |
24.6 cubic feet
..688 cubic meters |
|
Maximum Air Line Pressure |
120 PSI
|
|
**Optional stroke limiter will reduce air consumption by 60% when the machine runs with automatic feed unit. |
|
 |
 |
|
|
For More Information on contracting a Pad Printer
CLICK HERE or
Call (517) 265-4087 |
|
|
|
| |
| |
Phone: 517-263-0758
